Filter
Top Products
42 Projecting
3. Press the P
Power button again. The projector beeps twice, the
lamp is turned off, and the power light flashes orange for about 60
seconds as the projector cools down. When the projector has
cooled, the light stays orange and the exhaust fan shuts off.
If you want to turn the projector on again, wait until the orange
light stops flashing. Then press the P
Power button.
4. Press up on the blue foot release lever and lower the projector to
retract the front adjustable foot, as shown.
5. Replace the lens cap and unplug the power cord.
6. Turn off and disconnect any equipment plugged into the
projector.
7. If you won’t be using the projector for awhile, store it in the soft
case that came with it or in a protective case.
caution
To avoid damaging the
projector or lamp, never
unplug the power cord
when the power light is
green or flashing orange.