Filter
Top Products
16
After you customize your print settings, you can save them as a group so you can reuse
them whenever you print a similar project.
The default Gamma setting of 1.8 provides the optimum contrast
quality for your photos. However, you can change it to either 1.5 (for
decreased contrast) or 2.2 (for increased contrast; recommended for
matching colors with sRGB devices).
For more details on the printer settings, see your electronic Reference Guide, as
described on page 2.
Printing on Envelopes
You can load up to 10 envelopes at a time, flap
edge first and printable side up. Place them against
the right edge guide and slide the left edge guide
against them.
(You’ll get better results if you press each envelope
flat before loading it, or load one envelope at a
time.)
Set the thickness lever to the
+
position when you print on
envelopes or other thick media.
(Return the lever to the
0
position before you print on
regular paper.)
Select
Plain paper
as the Media
Type setting and choose the
correct envelope size as the Paper Size setting.
If the printing smears or you have banding (light lines), try turning off
High Speed
printing in the Advanced dialog box. (See your electronic Reference Guide for
instructions on accessing the dialog box.)
Lever
position for
envelopes
and thick
paper