Filter
Top Products
The table below lists the power management
options. Additional information follows.
Power management options
Setting
Options
Power
Enabled
Management
Disabled
System Idle Disabled
Enabled*
system Disabled
Standby
1 to 15
minutes;
2 minutes*
system
Disabled
Suspend 1 to 15
minutes;
10 minutes*
Hard Disk Disabled
Timeout
1 to 15
minutes;
5 minutes*
Screen Disabled
Timeout
1 to15
minutes;
2 minutes*
Low Battery
Suspend*
Save to HDD
Disabled
Instant On Enabled
Disabled*
Serial
Timeout
Enabled*
Disabled
Parallel
Enabled*
Timeout
Disabled
FDD
Enabled*
Timeout
Disabled
*Default setting
Description
Lets you enable power
management at all times
or disable it completely
Lets you disable the Idle
mode
Lets you disable or set the
period or inactivity
before the Standby mode
takes effect
Lets you disable or set the
period of inactivity
(following Standby)
before Suspend
Lets you disable or set the
period of inactivity
before the hard disk drive
turns off
Lets you disable or set the
period of inactivity
before the screen turns off
See "Customizing Power
Management" below
See "Customizing Power
Management" below
Enables or disables power
reduction when serial
device is inactive
Enables or disables power
reduction when parallel
device is inactive
Enables or disables power
reduction when diskette
drive is inactive
6-6 Customizing Your Computer