Epson 92 Projector User Manual


 
Securely connected at both ends
No longer than 9.8 feet (3 m)
Not connected to an extension cable
If you are projecting from a laptop computer, try turning off simultaneous display on the laptop screen
to avoid splitting the video signal.
Check the settings on the projector's Signal menu to make sure they match the video source. If
available for your video source, adjust the Progressive and Noise Reduction settings.
Select a computer video resolution that is compatible with the projector.
If you are projecting from a computer, press the Auto button on the remote control to automatically
adjust the tracking and sync settings.
If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to
improve image quality.
If you connected an extension cable, try projecting without it to see if it caused interference in the
signal.
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
Related tasks
Displaying From a PC Laptop
Displaying From a Mac Laptop
Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
Adjust the image focus.
Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
Position the projector close enough to the screen, and directly in front of it.
Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
150