Filter
Top Products
The Cut Sheet
Feeder
If the paper reaches the bottom of the print area when any of the
following line feed commands is used, the sheet in the printer is
automatically ejected and the next sheet is loaded.
LF:
Line Feed; advances the paper one line
VT:
Vertical Tab; advances the paper to the next
vertical tab position
ESC J: Line feed; advances the paper n/180th of an inch
Software is not effective while the printer is off line. Make sure that the
printer is on line if you wish to control the cut sheet feeder using
software commands.
Removing the Cut Sheet Feeder
1. Turn off the printer and remove any paper remaining in the bin and
printer.
Using the Printer Options
5-17