Filter
Top Products
Switching Between Continuous and Single Sheets
3.
Press the
LOAD/EJECT
button to feed the continuous paper
backward out of the printer and into the standby position. The
paper is still attached to the tractor but is no longer in the paper
path.
CAUTION:
Pressing the
LOAD/EJECT
button once may not
feed the paper far back enough to reach the standby position.
If
the PAPER OUT
light does not come on, you need to press
the LOAD/EJECT button again. With normal-width continuous
paper, you can press the
LOAD/EJECT
button up to three
times. If, however, you are using narrow paper (between 4
and 6 inches or 101.6 and 152.4 mm) you should only press
the LOAD/EJECT button once. Also, do not use this button to
eject labels.
WARNING: Never feed labels backward through the printer.
Labels can easily come off the backing sheet and jam the
printer.
2-18
Paper Handling