Filter
Top Products
Setting Up Your Application Software
Now that you have set up and tested the printer, you should make sure
that it works with your application programs.
Most application programs let you specify the type of printer you are
using so that the program can take full advantage of the printer’s
features. Many of these programs provide an installation or setup menu
that presents a list of printers to choose from.
If your application program has a printer selection menu, use the
instructions below.
Choosing From a Menu
Because the family of Epson printers shares a great many commands,
you can use an application program even if it does not list the
ActionPrinter 4500 on its printer selection menu. If the ActionPrinter
4500 is not listed, choose one of the following printers. They are listed
in order of preference.
LQ-1010
LQ-1050
LQ-2550
LQ-2500
LQ-1000
LQ-1500
If none of these printers is listed, select the first one available on the
following list:
LQ
LX
Epson printer
EX
RX
Standard printer
FX MX
Draft printer
To use all of the features of the printer, however, it is best to use a
program with the ActionPrinter 4500 or an LQ printer on its menu. If
your program does not list the ActionPrinter 4500 or an LQ printer,
contact the software manufacturer to see if an update is available.
1-26
Setting Up the Printer