Epson C42 Printer User Manual


 
Maintaining Your Printer
28
5. Insert the new cartridge and press
down firmly on the clamp. Make sure
the clamp is closed completely.
6. Press the
(
maintenance button.
If the other cartridge needs to be
replaced, the print head moves into
loading postion. Repeat steps 4
through 6.
7. Wait until ink charging is finished. (The green
P
power light stops flashing and
the red
(
error light goes out.) Ink charging takes about 30 seconds.
Now youre ready to print again.
If the red
(
error light remains on and the printer continues to make noise for more
than five minutes, open the printer cover and press the
P
power button to turn the
printer off. Then make sure that the ink cartridge clamps are completely closed. Close
the printer cover and press the
(
maintenance button to finish ink charging. If that
doesnt work, contact EPSON as described on page 45.
Maintenance
button
Dont move the print head
by hand; you could damage
the printer. Always use the
(
maintenance button.