Filter
Top Products
• Do not block or insert objects into the AC adapter port or tape ejection slot.
• Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.
• Do not place or store the product in the following locations: outdoors or in direct sunlight; near sources
of excessive heat, humidity, shocks, vibrations, or dust; where it may get wet or be exposed to
excessive humidity; on an unstable place such as a shaky or inclined surface; near potential sources
of electromagnetic interference such as loudspeakers or the base units of cordless telephones.
• The product and product manuals may come packaged in plastic bags. Keep plastic bags away from
small children to avoid any risk of suffocation.
• If you will not be using the product for a long period, unplug the power cord and remove the batteries.
• Before cleaning, unplug the power cord and remove the batteries. Use only a dry, soft cloth to clean
the product; do not use liquid or chemical cleaners.
• Take care not to cut your fingers when cutting tape with scissors.
• Turn the power off after use.
WARNING: The cords included with this product contain chemicals, including lead, known to the State of
California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is
provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)
Parent topic: Important Safety Instructions
Tape Cartridge Safety Instructions
• Use only compatible LC tape cartridges with this label: .
• To avoid damage, do not drop or disassemble tape cartridges.
• Feed the tape using the software commands. Do not forcibly pull out the tape. Otherwise, you may
damage the tape cartridge.
• Do not try to print with an empty tape cartridge; this may overheat the print head and damage the
product.
Note: Tape cartridges contain ink ribbons. Make sure to follow local ink disposal regulations.
Parent topic: Important Safety Instructions
Related references
Label Editor Printer Settings
99