Filter
Top Products
Removing the Card
Follow these steps if you need to remove the card:
1.
Make sure the printer is turned off.
2.
Remove the card by grasping it at the center and gently pulling
it straight out.
Note: Never insert or remove the card while the printer is turned
on.
3.
Turn on the printer.
If the CH. (EPL-7000/7100) or the FEED light is flashing, press
FEED; the printer then prints one page of data from the buffer.
Note: Never remove this card while the printer is on line, in
SelecType mode, or while resetting. If you do, a REINSERT
CARD, REMOVE CARD, or SERVICE REQ. message may appear
on the display. See the section on card error messages in your
printer manual.
Handing the PostScript CARD
1-7