8.
Change the Paper Source, Paper Size, Orientation, or other items
if necessary.
9.
Click “Connections” in the “Setup” menu.
10. Select the port for your printer. If you select a port already being
used by another printer, change the other printer’s port setting
to none.
11. Click “OK.”
12. Close the Control Panel. The setting process is now complete.
Note: You cannot load paper from your printer’s optional paper
tray when using Windows 2.x.
Running the screen-font installation program
Select the Windows version you plan to use with your typeface by
following the steps below.
1.
Insert the EPSON PostScript
™
CARD Fonts (MS-DOS™ Format)
Disk 1 in Drive A:. If you are still in Windows, exit to DOS.
2.
Type “A:” at the DOS prompt and press the ENTER key.
3.
Type “INSTALL” and press the ENTER key again. Follow the
instructions on the install program’s screen. See steps 6 through
10 on pages 3-6 through 3-8.
3-10
Installing Screen Fonts and Drivers