Filter
Top Products
To check the status of all printers that are turned on and enabled for
a protocol, follow the steps below:
1.
Open the EPSON Net! folder and click the EPSON Net! icon.
The following window appears:
Note:
If you don‘t see any printers in the list, try selecting the zone that the
printer is in or all zones by following the steps in the next section.
2.
To exit EPSON Net!, click Quit.
Selecting a Zone
You can select which printers to monitor according to their zone or
address. You must select a zone before you configure the Ethernet
card in the Configuration dialog box. Follow these steps:
1.
With the EPSON Net! dialog box open, choose Zone from the
Options menu bar.
2.
Click a zone to select it
clicking multiple zones
3. Click OK.
EPSON Net! sends a
packe,
current printer’s status.
The
latest information about
the
Sorting the Printers
Follow these steps to sort
tl
1.
With the EPSON Net!
(
Options menu bar.
sort
Q
by Zone
0
by Serial No
0
by Printer
nar
2.
Click any of the sort op
The EPSON Net! dialog bo:
selected sort option.
4
EPSON Ethernet Card Supplement