Filter
Top Products
6.
Click OK to send the new settings to the Ethernet card and
return to the EPSON Net! dialog box. Click Update to send the
new settings to the card without closing the Configuration
dialog box.
Caution:
Once you make changes to the Ethernet card, wait at least five
minutes before turning off or restarting your printer.
7.
Click Exit to exit EPSON Net! for Macintosh.
Configuring the Ethernet Card for TCP/IP Using EPSON Net! for
Macintosh
To configure the Ethernet Card for TCP/IP using EPSON Net! for
Macintosh, follow these steps:
1.
Open the EPSON Net! folder and double-click the EPSON Net!
icon.
Note:
If you do not know how to find out your computer’s IP address or the IP
address for the Ethernet card, ask your network administrator, or follow
the instructions on page 11.
2.
Highlight the printer you want to configure in the list.
3.
Click Open to open the Configuration dialog box.
4.
Click the
TCPAP
icon.
shows the correct
serk
5.
Set the following optic
box:
Cl
II’ address: Deter
Ethernet card.
Ll
Subnet mask: Ass
tl
Auto IP set: Click
6.
Click Update to send
tl
without closing the Co
send the new settings
2
7.
Click Exit to exit EPSO
After configuring the
Ethe.
on each Macintosh and ma
correctly.
Using
TCP/lP
in Windows
You can configure the
Ethc
Windows 95 on a TCP
/
IP
I
network.
Installing
TCP/lP
in Window
1.
Click Start, point to Se
I
2. Double-click the Netw
8
EPSON Ethernet Card Supplement