Filter
Top Products
2.
Highlight the printer you want to configure in the list.
3.
Click Open. You see the Configuration dialog box:
4. Click the AppleTalk icon. Make sure the correct serial number of
your Ethernet card is displayed.
5.
Set the following options in the AppleTalk Configuration box:
CL
Available Zone: Select the network zone that you want
the printer to appear in.
Ll
Printer Name: The default printer name appears. You
can rename it. If the same types of printers are connected
to the network, be sure to give them unique names.
Ll
Entity Type: EPSON Net! displays the printer’s Entity
type on an AppleTalk network. You don’t have to set
these options.
Li
Network No.: You may not see this option. If you do,
you should keep Auto selected. If you want to change it,
click Manual and enter a number.
Ll
AppleTalk I’S: You may not see this option. It is only
available when an EPSON PostScript
®
printer that is
connected to the network cannot make AppleTalk active
or inactive automatically.
EPSON Ethernet Card Supplement 7