Filter
Top Products
Submenu Function
Geometric Cor-
rection
You can correct distortion.
s "Correcting Distortion in the Projected Image" p.43
• H/V-Keystone:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
• Quick Corner:
Select and correct the four corners of the projected image.
• Arc Correction:
Fine adjustment of the curved distortion caused by slack
or shrinkage of the screen.
• Point Correction:
Divides the projected image into a grid and corrects the
distortion by moving the selected point of intersection
from side to side and up and down.
Split Screen
You can split the screen into two screens.
s "Projecting Two Images Simultaneously (Split Screen) "
p.60
Control Panel
Lock
You can use this to restrict operation of the projector's
control panel.
s "Control Panel Lock" p.74
Power Con-
sumption
When set to Normal, the lamp is at its brightest.
When set to Temp Interlock, if the surrounding
temperature
*
gets too high, the lamp automatically dims to
control the operating temperature.
When set to ECO, the power consumption during
projection drops and the fan noise is reduced.
Volume
You can adjust the volume. Setting values are saved for each
source.
Submenu Function
Remote Receiv-
er
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from
the remote control. If you want to make operations from
the remote control, hold down the [Menu] button on the
remote control for at least 15 seconds to reset the setting to
its default value.
User Button
Select the items from the Configuration menu that you want
to assign to the [User1], [User2], and [User3] buttons on
the remote control. The following items can be assigned.
Power Consumption, Info, Progressive, Geometric
Correction, Multi-Projection, Resolution, Memory, or
Image Processing
Test Pattern
You can display a test pattern to adjust the projection
without connecting other equipment when you set up the
projector.
s "Displaying a Test Pattern" p.23
Memory
Perform operations and make settings for the memory
function.
s "Memory Function" p.67
Reset
You can reset all adjustment values on the Settings menu to
their default settings, except for User Button and
Memory.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.103
*
Operating temperature of +40˚C at an altitude of 0 to 1499 m, and +35˚C at
an altitude of 1500 to 3048 m.
List of Functions
85