Filter
Top Products
Submenu Function
Web Remote
Password
Set a password to use Web Remote. You can enter up to 8 single-
byte alphanumeric characters. (* cannot be used)
Web Remote is a computer function that allows you to operate
the projector by using the Web browser on a computer
connected on a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.145
Projector Key-
word
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
s EasyMP Network Projection Operation Guide
Wireless LAN menu
To connect the projector to a computer using a wireless LAN, install the
Wireless LAN unit (ELPAP07).
s "Installing the Wireless LAN Unit" p.38
Submenu Function
Wireless LAN
Power
Set this to On when connecting the projector and a computer via
a wireless LAN. If you do not want to connect via wireless LAN,
turn it Off to prevent unauthorized access by others.
Wi-Fi Protected
Setup
Set this when connecting to a network via a wireless LAN access
point compatible with
WPS (Wi-Fi Protected Setup)
g
. You can
easily connect the projector to the access point and make security
settings.
s "Making a WPS (Wi-Fi Protected Setup) Connection with a
Wireless LAN Access Point " p.142
Wireless LAN sys-
tem
Sets the wireless LAN system. Normally this should be set to
802.11b/g/n. The connection method is selected automatically
according to the access point settings.
In an area that does not support 802.11n, only 802.11b/g is
displayed.
List of Functions
92