Filter
Top Products
Replacing the Lamp - 113
EMP-715/505E mainte.fm
5
Attach the lamp cover.
Align the direction, insert the fan, and then secure it in place with the one screw.
Point
· Attach the lamp firmly. A safety mechanism on the projector switches off the power auto-
matically when the lamp cover has been removed. The power will not be reinstated unless
the lamp and lamp cover are set firmly in place.
· A replacement Air Filter is packaged with the replacement lamp. Replace the Air Filter at
the same time as replacing the lamp.
· The illumination time will be automatically reset when the lamp has been replaced with a
new one.
715_505E.bk Page 113 Friday, May 25, 2001 10:24 AM