Filter
Top Products
40 - Ending
EMP-715/505E projection.fm
■
■■
■ Ending
End projection in accordance with the following procedure.
1
Switch off the power supply to the connected equipment.
2
Press the [Power] button.
A message to confirm that the power needs to be switched off will be displayed.
3
Press the [Power] button once more.
The lamp will be extinguished, the Operation Indicator will blink in orange, and the cool-
down process will commence.
The Operation Indicator will change from blinking to being illuminated in orange once the
cool-down process has been completed. The cool-down period will take approximately
ninety seconds (depending on the surrounding temperature).
Point
· Press a different button if the power is not to be switched off. The message will be erased
after seven seconds if no buttons are pressed (the power will remain on).
· Button operations are not possible when the Operation Indicator is blinking in orange. In
this event, please wait until full illumination has been attained.
Power
Source
Enter
Help
Keyston
e
S
elect
Power
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Power
Power OFF?
Please press Key again
to power off.
Power
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Power
Power
Source
Enter
Help
K
eystone
Select
Power
715_505E.bk Page 40 Friday, May 25, 2001 10:24 AM