Epson EMP 71 Projector User Manual


 
25
Projection
When preparations are complete, you are ready for projection.
1.
To use the remote control, turn the remote
control R/C switch to "On".
2. Press the Power button to switch power on.
The operation display indicator begins to
flash green, and projection begins.
After approximately 30 seconds, the
operation display indicator changes from
flashing green to steady green.
Projector Remote control
"No-Signal" is displayed.
Depending on your settings,
there may be no display.
(See page 47)
The operation display indicator
lights green.