Epson EMP 71 Projector User Manual


 
50
About Menu
Displaying Menus
Press the Menu button, use the Enter button to select "About" from the top
menu displayed, and press the Enter button to move to a submenu.
Setting and Display Information
The settings information displayed in the About menu differs as shown below
during video projection from a computer/component versus a video device.
D-Sub15: Computer/Component video Video: Video image
: Display : No display
Menu Content
Video Projection
D-Sub15 Video
Lamp Displays cumulative lamp-on time.
Reset Lamp
Timer
Sets cumulative lamp-on time to zero.
Use this function when replacing the lamp.
Video Source Displays the source for the video
displayed on screen.
Input Signal Displays a computer/component video
input signal.
Frequency Displays frequencies.
H: Displays the horizontal scanning
frequency.
V: Displays the vertical scanning
frequency.
SYNC Polarity Displays sync polarity.
SYNC Mode Displays sync attributes.
Resolution Displays input resolution.
Refresh Rate Displays refresh rate (vertical frequency).
Video Signal Displays an A/V device signal mode.
(When set to Auto in the menu, "Auto
(NTSC)" is displayed.)
Computer/Component Video Projection Video Projection