Epson EMP 71 Projector User Manual


 
44
D-Sub15: Computer/Component video Video: Video image
: setting available : setting not available
Menu Content
Video Projection
D-Sub15 Video
Brightness Adjusts image brightness.
+: Brightens image.
- : Darkens image.
Contrast
* Adjusts difference in color brightness/darkness.
+: Increases difference in color brightness/
darkness.
- : Decreases difference in color brightness/
darkness.
Color Adjusts color depth.
+: Deepens color.
- : Lightens color.
Tint Adjusts tint.
+: Strengthens red.
- : Strengthens green.
Sharpness Adjusts image sharpness.
+: Strengthens sharpness and defines image.
- : Weakens sharpness and softens image.
* If keystone correction makes unevenness
distinctive, reduce the sharpness.
Gamma
* Adjusts color of projected image.
Dynamic : Increases contrast. (Used when
projecting images containing text and
graphics)
Normal : Sets normal contrast.
Natural : Weakens contrast to natural colors.
(Used to give projected images a
more natural look)
Input Signal Select the input signal of the computer/
component video in use.
RGB: Computer images
YUV
*: Color difference* images
YCbCr
*: DVD images
YPbPr
*: HDTV images
Auto Setup Optimizes computer input image.
(Can only be set when the input signal is RGB)
ON : Auto Setup active
OFF : Auto Setup not active
Mode Select the video mode to use.
* Selection of Auto provides automatic video
signal identification, but for PAL (60Hz) mode,
set to Manual.
Aspect Ratio Select the aspect ratio
*.
(Can only be set when projecting a component
video image (YCbCr*, YPbPr*).)
Reset Returns Video menu settings to factory shipping
values.
* See page 52 for factory shipping values.
To reset all menus to factory shipping values,
use the "Reset All" menu.