Filter
Top Products
40 - Connecting the video equipment
In the case of RGB image signals
· Connect the projector’s Computer 2/Component Video- BNC Port to the video equipment
with the component image cable (available on the open market).
· Connect the supplied RCA Audio Cable (Red/White) to the S-Audio/Audio #2 Port if the
sound is to be output from the projector’s speakers.
Point
· Purchase the component image cable so that one end matches the BNC type port on the
projector and the other matches the port on the video equipment.
· Set the BNC parameter to [RGB] when the connection has been established. (see
page 70)
R/Cr/Pr Port
G/Y Port
B/Cb/Pb Port
Audio Port (white)
Audio Port (red)
To the R output port
To the G output port
To the B output port
RCA Audio Cable (supplied with the projector)
For component images
cable (available on the
open market)
To the audio output port L
(white)
To the audio output port R
(red)