Epson EMP-S3 Projector User Manual


 
55
Installation
Setting Up the Projector
The projector supports the following four different projection methods,
allowing you to choose the best method for displaying your images.
* A special method of installation is required for suspending the projector
from a ceiling. Please contact your supplier if you would like to use this
installation method. The optional ceiling mount is required when
installing the projector on a ceiling. sp.66
•Before setting up the projector, make sure you read the
separate SafetyInstructions/World-Wide Warranty
Terms first.
•Do not set this projector up on its side to carry out
projection,otherwise malfunctions may occur.
Front projection (Front projection)
Rear projection using a translucent screen (Rear projection)
When using ceiling projection or projection using a
translucent screen, set the "Projection" command in the
"Extended" menu to match the installation method.
sp.36
Front/ceiling projection (Front/Ceiling projection)
Rear/ceiling projection using a translucent screen
(Rear/Ceiling projection)