Filter
Top Products
15
Configuration Menu Functions
Configuration Menu
Resolution
Sleep Mode
Language
The message text will be displayed in red when it
is time to replace the lamp.
Time from 0H to 10H will be displayed as 0H.
From 10H onwards, the display will be in units of 1H.
The "Info" menu is only used to display the projector status.
Memory Reset
All Reset
"Setting" menu "Info" menu
"Reset" menu
OFF , NR1, NR2
0% ,7.5%
(Varies depending on country of purchase)
Top-left, Top-center, Top-right, Center-left
Center-right, Center , Bottom-left, Bottom-center, Bottom-right
OFF , 5min. ,10min. , 30min.
RS-232C , USB
Advanced
p.18
Screen
Operation
Vertical Size
Zoom Position
Color 1 , Color 2, Color 3
On-Screen
Display
Auto
Black , Blue, Logo
Output Scaling
Setup Level
Position
Zoom Caption
Keystone
Projection
Menu Position
Sleep Mode
COM Port
Progressive
Noise Reduction
Trigger Out
Lock Setting
LCD Panel Adjustment
Navigation Bar
Menu Color
Video Signal
Input A
D4
Message
Startup Screen
Background Color
YCbCr ,YPbPr
Input Signal
YCbCr ,YPbPr , RGB-Video
Focus Lock
Lamp Hours
Source
Input Signal
Resolution
Video Signal
Refresh Rate
Sync Info
Reset
Only displayed for composite video/S-Video input
Only displayed for component video/RGB-video/Computer input
Only displayed for RGB-video/Computer input
Setting is only possible when component video
signals are being input or when NTSC signals
from composite video or S-Video are being input
.
Setting is only possible when composite video
signals or S-Video signals are being input.
ON, OFF
ON, OFF
Key Lock
ON, OFF
Child Lock
ON, OFF
Zoom Lock
0
p.18
p.19
p.20
p.21
p.21
p.21
p.XXX
p.22
p.22
Median value (0)
,
,
ON ,OFF
ON ,OFF
ON ,OFF
Yes , No
Yes , No
Yes , No
,NTSC , NTSC4.43, PAL
M-PAL, N-PAL, PAL60, SECAM
Lamp - Hours Reset
indicates default settings
ON , OFF
Normal Smaller
Normal Larger
When video images are input
When computer images are input:
ON , OFF
Yes , No
Front ,Front/Ceiling
Rear ,Rear/Ceiling
p.22
(Varies depending on country of purchase)
Median value (0)