Filter
Top Products
18
Configuration Menu Functions
"Setting" menu
(Setting is only possible when 525i or 625i component video signals are being input)
•
OFF :IP conversion is carried out for each field in the screen. This is ideal for using
when viewing images with a large amount of movement.
•
ON :Interlaced (i) signals are converted into progressive (p) signals. This is ideal
for using when viewing still images.
OFF
(Setting is only possible when composite video signals or S-Video signals are being
input.)
This suppresses interference in images and makes the images appear softer. If viewing
images with little or no interferences, such as images from DVDs, it is recommended
that you change this setting to "OFF".
OFF
This changes the display area (the part of images projected).
•When component video, RGB-video, composite video or S-Video signals
are being input
Normal (92% display) :Input signals are projected at the normal image size. TV
images are displayed at 92% size.
Larger :Component video and RGB-video images are displayed at 100% size.
Composite video and S-Video images are displayed at 95% size.
The areas at the top, bottom and sides of images that cannot normally be seen
are inserted and projected. Interference may occur at the top or bottom of the
images depending on the image signal.
Normal
•When computer signals are being input
Normal (100% display) :Input signals are projected at the full image size.
Smaller(95% display) :The edges of the images are truncated when projected.
Select this option if there is interference at the top or bottom
of the images.
Normal
(Setting is only possible when component video signals are being input or when
NTSC
signals from composite video or S-Video are being input.)
If using products designed for destinations such as the United States or South Korea that
have different black level (setup level) settings, use this function to obtain correct
images. Check the specifications of the connected equipment when changing this
setting.
0%
(Varies depending on
country of purchase)
Use , , and to move the display position for images.
*1 The setting values are stored separately for each image source and signal type.
Default setting
Advanced
Progressive *
1
Noise Reduction *
1
Output Scaling *
1
Setup Level *
1
Default setting
Screen
Position *
1