Filter
Top Products
17
Configuration Menu Functions
Configuration Menu
"Color Adjustment" cannot be selected when the colour mode is set to "sRGB ".
•Color Temp. : The colour temperature can be selected from three settings in order to
adjust the overall tint of the images. p.10
Low (5500K)
(Depends on colour
mode)
•
Flesh Tone : This adjusts the flesh tones of people who appear in the images.
p.10
5 (Depends on color
mode)
This adjusts the brightness of the dark, bright and intermediate areas of the images.
p.10
Offset R/G/B: 0
Gain
R/G/B: 0
Gamma
R/G/B: 2.2
The Color Mode can be selected from five different settings in accordance with the
images being projected. p.8
Living Room
This can be used to save the current configuration menu settings and the aspect . p.12
This command causes images to be displayed back at their original settings if they have been adjusted
according to settings that were loaded using the "Memory: Advance" command. To return images to their
original settings, select "Yes".
This sets automatic adjustment to on or off in order to set whether the projector
automatically adjusts images to their optimum condition when the input signal is
changed.
ON
This returns all settings in the "Image" menu to their default settings, except for the settings that have been
saved using the "Memory: Standard" command. The "Memory: Standard" settings can be reset using the
"Memory Reset" menu. p.22
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and colour mode setting.
Only displayed for RGB-video/Computer input
Default setting
Color Adjustment
Color Temp.
*
2
RGB *
1
Default setting
Color Mode
*
1
Memory: Standard
Last Memory
*
1
Default setting
Auto Setup *
1
Reset