Filter
Top Products
Logos Imaging EPIX Scanner
User Manual
5
CAUTION STATEMENTS
Completely erase the imaging plates.
Before reusing an imaging plate, lay it blue
or white surface up facing a bright light
source for two (2) minutes as described in
Section 5.2.
Mount the imaging plates under low light
conditions.
Mount the imaging plates to the carousel
under low light conditions as described in
Section 5.4. Exposure to direct sunlight or
direct indoor lighting will erase the
information stored on the imaging plate.
Do not place scanner on or next to a
radiator or water source.
Excessive heat or small amounts of water
may damage the scanner’s electrical
components.
Do not leave unscanned, exposed imaging
plates in light.
Leaving unscanned, exposed imaging plates
in light will cause loss of image quality.
Do not scratch the imaging plates
When handling the imaging plate, do not
touch the active side (blue or white) with
fingernails or any sharp object that might
scratch the surface. Do not lay unprotected
imaging plates face down.