Filter
Top Products
3-6
Using the Interface Card with NetWare
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Note:
❏ If you have connected more than one printer with the same type
of interface card to the network, you can distinguish between
the cards by the MAC address on a status sheet or the sticker
on the interface card.
❏ If the IP address is set to the default IP address, the printer model
may not appear.
❏ If printers do not appear in the IPX group, check that the printer
is turned on. If it is on, check that the printer is in the same
segment as the computer.
❏ You can search printers in other segments by changing the
Search Options-IPX settings in the Tool menu in EpsonNet
WinAssist. See “Search Options-IPX:” on page 9-6 for more
information.
5. Click the
NetWare
tab to make the settings.
Note:
If the current login environment is different from the current
configuration for the interface card, a message appears. Follow the
on-screen instructions.
6. Make the following settings for Printserver/bindery mode.