Filter
Top Products
24
Printing From Your Camera’s Memory Card
Make sure the image files on your card meet these requirements:
2. After you insert the card, the memory card
access light flashes, then stays on.
Caution:
Do not remove the card or turn off the Artisan
810 Series while the light is flashing, or you may
lose data on the card.
3. See page 26 to select and print your photos.
Removing Your Card
After you finish printing your photos, follow these steps to remove the card:
1. Make sure the memory card access light is not flashing.
2. If the Artisan 810 Series is connected to your computer with a USB cable, do
one of the following before removing the memory card or turning off the
printer:
■
Windows: Click the or icon on the taskbar and select
Safely
remove USB Mass Storage Device
.
■
Macintosh: Drag the removable disk icon from your desktop into the
trash.
3. Pull the card straight out of its slot.
File format JPEG with the Exif version 2.21 standard
Image size 80 × 80 pixels to 9200 × 9200 pixels
Number of files Up to 9990 (If there are more than 999 photos on the
card, you can select a group of photos to display.)
Memory card access light