Filter
Top Products
Setting Up the Projector
11
If you place the projector below the level of the screen, you’ll have to
tilt it up by extending the feet as shown. Tilting the projector upward
causes the image to lose its rectangular shape, but you can correct the
distortion by pressing the
Keystone
button as described in the next
chapter.
If you place the projector level with the bottom of the screen, the
image will be rectangular and you won’t have to adjust it. If you place
the projector higher than the bottom of the screen, the image will still
be rectangular, but you won’t be able to fill the whole screen with the
image.
ideal
height
note
A
fter positioning the
p
rojector, you may want to
connect a Kensington
M
icroSaver anti-theft device
to the lock port on the
p
rojector’s left side. You can
p
urchase this from EPSON;
see page 8
.