Filter
Top Products
Setting Up the Projector
15
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
The projector supports NTSC, PAL, and SECAM, and automatically
detects the video format.
A standard RCA A/V cable is included with the
projector. If your video source also has an S-video
jack (as shown with an S-video plug at the right),
you can use it to provide a higher quality video image. However,
you’ll need an S-video cable, which may be included with your video
source, or may be purchased from an electronics store or video dealer.
Follow the instructions below for your type of connection.
Connecting the RCA A/V Cable
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect the yellow plug on one end of the A/V cable to the
projector’s
Video
jack. Then connect the audio plugs to the left
and right
Audio
jacks (insert the white plug into the
L
port and
the red plug into the
R
port).
2. Connect the plugs on the other end of the cable to the video-out
and audio output jacks on your video source.
4
2
3
1
note
The projector does not
support TV antenna cable
F connectors.
Video jack
RCA A/V cable
L
port
R
port