Filter
Top Products
EPSON Stylus C82
12
-
EPSON Stylus C82 10/02
Transporting the Printer
If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
Caution: To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 5 after installing
the printer in its new location.
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord.
3. Disconnect the printer cable from the printer.
4. Remove any paper from the printer and remove the paper
support.
5. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
6. Push in the output tray extensions and close the tray.
7. Repack the printer and attachments in the original box
using the protective materials that came with them. See
your Start Here sheet.
Keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 9); if output is
misaligned, align the print head (see page 10).
Related Documentation
PL-SC82 EPSON Stylus C82 Parts Price List
CPD-14293R2 EPSON Stylus C82 Start Here
CPD-14295R1 EPSON Stylus C82 Printer Basics
CPD-14296R1 EPSON Stylus C82 CD-ROM with
Reference Guide
CPD-15375 Attention Windows Users slipsheet (describes
Online Support button and how to order
ink online)
Tape the ink
cartridge holder to
the printer case