Filter
Top Products
11
6. Place the black ink cartridge in the holder with the label facing up and toward the
back of the printer, as shown. Then close the clamp, making sure it clicks into
place.
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets in your eyes, flush them immediately
with water.
7. Press the
X cleaning button to move the color ink cartridge holder into loading
position.
8. Repeat steps 5 and 6 to install the color ink cartridge.
9. Press the
R cleaning button to begin charging the ink delivery system and then
close the printer cover.
Charging takes about 2 minutes. The
P power light flashes and the printer makes
various sounds until it’s finished. Don’t turn off the printer or interrupt this
charging process or it will start over, using more ink than necessary. Charging is
finished when the
P power light stops flashing and stays on.
Never turn off the printer when the
P power light is flashing,
unless the printer hasn’t moved or made any noise for more than
5 minutes.
Start.book Page 11 Tuesday, October 3, 2000 5:14 PM