Filter
Top Products
46
Macintosh System Requirements
To use your printer and its software, your system should have:
■
An Apple Macintosh OS 7.1 or higher, Apple iMac
™
series, or Power Macintosh G3 or
G4
■
16MB of available RAM (more recommended)
■
50MB of free hard disk space (100MB recommended)
■
VGA display or better
■
CD-ROM or DVD drive for installing the printer software
■
Ethernet network connection: a twisted-pair RJ45 “straight through” cable to connect the
printer’s Ethernet card to your network. (If you’ll be connecting your computer directly
to the printer, you must use an RJ45 “crossover” cable.)
USB connection: a USB port and a shielded USB “AB” cable up to 6.5 feet (2 meters)
long. In addition, your iMac must be running Mac
®
OS 8.5 or later (Mac OS 8.5.1 or
later recommended); if not an iMac, your Macintosh must be running Mac OS 8.5.1 or
later.
Using an improperly shielded USB cable—especially a cable more
than 6.5 feet (2 meters) long—may cause the printer to malfunction.
If your iMac is running OS 8.1 and you want to use USB, you need to
upgrade your operating system to OS 8.5.1 or later before installing your
printer software. To find out which operating system your iMac is
running, select About This Computer from the Apple menu.
Download the update for your system from Apple at
http://asu.info.apple.com. Contact Apple if you have problems installing
an update.
Start.book Page 46 Tuesday, October 3, 2000 5:14 PM