Filter
Top Products
35
Turning Monitoring On and Off
After Status Monitor 3 is installed, it automatically performs background monitoring
whenever you print a document. If an error occurs, such as a paper out error, you’re
automatically notified of the problem. However, background monitoring increases
network traffic, so you may wish to turn it off at some or all workstations. See
“Disabling Background Monitoring” on page 39.
If background monitoring is turned off, you can still start Status Monitor 3 in one of
the following ways:
■
from the
Utility
tab on the printer’s Properties dialog box (below)
■
by placing a shortcut icon on the Windows taskbar (page 37)
Turning On Monitoring from the Properties Dialog
Box
After selecting a printer to monitor (see page 32), follow these steps to launch EPSON
Status Monitor 3 from the printer’s Properties dialog box:
1. Click
Start
, point to
Settings
, then select
Printers
.
2. Right-click your
EPSON Stylus Color 980
printer icon.
3. Select one of the following:
■
Properties
(if you’re running Windows 95 or 98)
■
Printing Preferences
(if you’re running Windows 2000)
■
Document Details
(if you’re running Windows NT)
Start.book Page 35 Tuesday, October 3, 2000 5:14 PM