Filter
Top Products
❏ Loads continuous paper from the standby position.
❏ Feeds continuous paper backward to the standby position.
11. Pause light
❏ On when the printer is paused.
❏ Flashes when the printer is in Micro Adjust mode.
12. Pause button
Stops printing temporarily, and resumes printing when pressed again. When pressed for three
seconds or more, the printer enters Micro Adjust mode*. The printer exits the mode when pressed
again.
13. Job Cancel button
Cancels the print job when pressed for three seconds or more when the printer is paused.
14. Right ink light ( Y, M, C) (GP-C830/GP-C831/GP-C832)
❏ Flashes when ink is low.
❏ On when an ink cartridge has reached its replacement time or when the right ink cartridge cover is
closed with an ink cartridge not installed.
15. Right ink light ( K) (GP-M830/GP-M831/GP-M832)
❏ Flashes when ink is low.
❏ On when an ink cartridge has reached its replacement time or when the right ink cartridge cover is
closed with an ink cartridge not installed.
* Micro Adjust mode: When you hold down the Pause button for three seconds, the printer enters
Micro Adjust mode. In this mode, you can press the FF D and Load/Eject U buttons to adjust the
top-of-form or tear-off position. For more information, see “Adjusting the top-of-form position” on
page 24.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Control Panel 54