Filter
Top Products
Using Continuous Paper
The printer’s paper-handling system allows you to load
continuous paper through the front, rear, or bottom.
You can print on continuous paper from 101 to 406 mm (4 to 16
inches) wide.
To print on continuous paper, you need to install the tractor unit
in the front or pull position. Be sure you set the paper release lever
correctly.
Note:
The rear push tractor cannot be removed.
Selecting the tractor position and paper path
The table below lists the different way to feed continuous paper.
Always set the paper release lever to the position indicated for the
paper feed method you are using.
Tractor
position
Paper release
lever position Paper paths
Front push
tractor and
front push/pull
Rear push
tractor and
rear push/pull
Pull tractor
2-13,13a,13b
2-14,14a,14b
2-15,15a
L
Sunflower-E
Rev.D
A5 size Chapter 2
02/05/96 pass 1
2-8
Paper Handling