Filter
Top Products
Pull Tractor
The optional pull tractor (C80032
✽
) provides optimum continuous
paper handling. (The asterisk (
✽
) is a substitute for the last digit of
the product number, which varies by country.)
The pull tractor is especially useful with continuous multipart
forms. For best results, use the optional pull tractor along with
your standard tractor installed in the front push tractor position.
See Chapter 2 for instructions.
Note:
You cannot remove the rear push tractor. When you load continuous
paper from the front paper path with the pull tractor on top, you can
install the optional pull tractor in the pull tractor position.
Loading paper with the push tractor and the optional
pull tractor
1. Make sure the printer is turned off and the standard tractor is
installed in the push tractor position.
2. Remove the paper tension unit by lifting it up and off the printer.
3. Install the optional pull tractor in the pull tractor position as
described in ”Using the pull tractor position” in Chapter 2.
Note:
The optional pull tractor cannot be installed in the rear push tractor
position.
4. Make sure that the paper release lever is in the push tractor
position.
5. Load the paper in the push tractor as described in Chapter 2.
6. Press the
LF/FF
button to advance the paper to the next page.
L
Sunflower-E
Rev.D A5
size Chapter 4
02/05/96 pass 1
4-8
Using Printer Options