Filter
Top Products
4. Press the
Load/Eject
[
↑
] button to move the loading position
down on the page, or press the
LF/FF
[
↓
] button to move the
loading position up on the page.
For continuous paper, mark a point 6.5 mm above the perforation
and position the paper as shown. This gives you an 8.5 mm
margin.
Note:
❏
The printer has a minimum and maximum loading position. If
you try to advance the loading position beyond these limits, the
printer beeps and the paper stops moving.
❏
When the paper reaches the factory-set loading position, the
printer beeps and paper feeding pauses briefly. Use the factory
setting as a reference point when adjusting the loading position.
3-6anew
6.5 mm
8.5 mm
margi3
L
Sunflower-E
Rev.D A5 size Chapter 3
02/05/96 pass 1
3-14
Using the Printer