Filter
Top Products
5
Troubleshooting 5-7
R4C4590
Rev. C
A5 size TRBLE.FM
10/30/00 Pass 1
R
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley _______
The optional cut-sheet feeder does not feed your single-sheet
paper properly.
Cause What to do
The cut-sheet feeder is not
installed properly.
Reinstall it as described in “Installing
the cut-sheet feeder” on page A-3.
Too many sheets are loaded
in the cut-sheet feeder.
Load no more than 150 single sheets in
the high-capacity cut-sheet feeder. See
“Cut-Sheet Feeders” on page A-2 for
more information.
You may have loaded the
wrong type of paper in bin 2
of the double-bin cut-sheet
feeder.
Use only the high-capacity feeder
(bin 1) or the sheet guide for single-
sheet multipart forms (only the type
glued at the top of the forms),
envelopes, and postcards.
The edge guides of the
cut-sheet feeder are not
positioned correctly.
Align the left edge guide with the
arrow mark, then move the right edge
guide to match your paper’s width.
There are only a few sheets of
paper left in the bin.
Load more paper in the cut-sheet
feeder.
Sheets of paper are stuck
together.
Remove the paper stack, fan it, and
then reload it.