Filter
Top Products
A-10 Enhancing Your Printer With Options
R4C4590
Rev. C
A5 size OPTIONS.FM
10/30/00 Pass 1
L
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley _______
7. Push back the paper set levers to clamp the paper against the
guide rollers.
8. Before printing, make sure single sheet feeding is selected.
Also adjust the thickness setting to the paper loaded in the
cut-sheet feeder. See “Adjusting the Paper Thickness Lever”
on page 2-6 for details.
9. In your printer driver software, select your paper size from
the Paper Size list, and select
Sheet Feeder Bin-1
from the
Paper Source list. (If you are printing from a DOS application,
select the bin number using the
Tear Off/Bin
button (LQ-680)
or the
Paper Source
button (LQ-680Pro) on the control panel.
If you use envelopes or postcards, select
Card
or
Envelope
on the control panel as described in “Using Envelopes” and
“Using Postcards” in Chapter 2.)
The cut-sheet feeder loads paper when you send data to the
printer. You can also load paper by pressing the
Load/Eject
button.