Filter
Top Products
(e) Avoid use of the Printer in humid locations or in the vicinity of heat
generating sources such as heater, etc.
Fig. 20 Laying Printer on Firm Surface
(2) Removal of protective paper for paper end detector
The MX-80 F/T Type II is provided with a protective paper inserted between
the inner and outer paper guides to protect the paper end detector from
damage due to shocks or vibrations during transportation. Before using the
Printer, be sure to remove this paper. If the MX-80 F/T Type II is to be
reshipped, remember to return it to the original position.
(3) Prepare tools
Prepare the following two tools to disassemble or assemble the printer.
(1) Phillips type screwdriver 1 pc.
(2) Round-blade type screwdriver 1 pc.
-19-