Filter
Top Products
STEP 8.
Raise the two sprocket lock levers to loosen, and adjust the sprocket pin
position to the paper width. (See Fig. 31.)
STEP 6.
Engage the paper feed holes of the paper on the feeding pins, push the
scale back into position, and adjust the tension of the paper. Then push
the paper holding covers and the two sprocket lock levers down. (See
Fig. 32.)
NOTE: In this case, confirm that the feeding pins are centered in the respective
paper feed holes of the paper. Do not lock the release lever.
Paper Holding Covers
Sprocket Lock Lever
Fig. 32 Engagement of Paper Feed Holes on Feeding Pins
-26-