Filter
Top Products
Upload Font:
Custom fonts may be developed for this printer to meet unique
customer applications. For further information, if you are in
N. America, contact Pentax at 1-800-543-8144 or 1-303-460-
1600. If you are in other areas, contact your local dealer.
Factory Reset:
Clicking on this button will return the printer to its original
factory settings for fonts and configuration
. The configuration
data from the file \PJ3Factory.cfg will be loaded and
displayed. Since that file is expected to match the internal
factory configuration of your printer, this file’s properties are
set to “Read Only” and it should not be modified.
Save Config:
Clicking on this button will save the configuration as you see it
to the file \PJ3Default.cfg or \PJ3plusDefault.cfg and then
send this configuration information to the printer. Be sure that
all of the settings are adjusted to your liking. Once sent to the
printer, these settings will become the power-on default
settings.
Close:
This selection closes this application without sending data to the
printer and without saving the current settings.
Page 37