Filter
Top Products
Stylus Photo R300/R310 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 39
2.3.2 Removing Housing, Upper
External View
Figure 2-3. Removing "Housing, Upper" (1)
Figure 2-4. Removing "Housing, Upper" (2)
Parts/Units which should be removed before removing "Housing, Upper"
Paper Support Assy.
Procedure for Removing
1. Push the damper shaft by putting in the tweezers or alike into the installing
hole of "Printer Cover". Then, remove "Printer Cover".
2. Push up the rib of "Colour LCD Cover" and then remove "Colour LCD
Cover".
3. Remove the screws (x4) which secure "Housing, Upper".
4. Release "Carriage Lock" with the tweezers or alike and then move "Carriage
Unit" toward the centre.
5. Release the hooks (x4) which secure "Housing, Upper" and then lift up
"Housing, Upper".
6. Detach "Panel FFC" from the connector of "Panel Board" and then remove
"Housing, Upper".
Printer Cover
Rib of Colour
LCD Cover
Housing, Upper
2
3
4
C.B.P 3x8 (4-6kgf•cm)
Damper Shaft Installing Hole
1
C.B.P 3x8 (4-6kgf•cm)
Carriage
Lock
Carriage Unit
Hooks Hooks
Connector
Panel FFC