Epson Stylus Photo R380
10/06 Epson Stylus Photo R380 - 7
Caution: Be sure to insert the CD/DVD tray while the printer is
turned on; this ensures that the print position will be adjusted
automatically.
Do not insert the CD/DVD tray while the printer is printing;
otherwise, your printer may be damaged or the surface of the CD
or DVD may become dirty or scratched.
Designing CDs and DVDs
You can use the Epson Print CD program (included on the
Printer Software CD-ROM) to create and print a design with
images, graphics, and text. See your Printer Basics manual or
on-screen User’s Guide for instructions.
Printing Your Design
After you have created your design and loaded a CD or DVD,
follow these steps to print:
1. Open the File menu and select
Print.
2. Make sure
EPSON Stylus Photo R380 Series (Windows)
or
Stylus Photo R380 (Macintosh) is selected.
3. Select
CD/DVD or CD/DVD Premium Surface as the
Media Type setting.
4. Select
None as the Print Confirmation Pattern setting
(Windows) or Test Print Pattern setting (Macintosh).
5. Click
Print.
Note: You can print on only one CD or DVD at a time. When the
Copies setting is set to 2 or more, remove each disc from the
tray after it has been printed, and then place the next CD or DVD
on the tray. Then press the Start button to resume printing.
After you print, handle the CD or DVD carefully and allow the ink
to dry for at least 24 hours before playing the disc or inserting it in
a drive. Keep printed discs away from moisture and direct
sunlight.
After you finish printing on a CD/DVD, remove the CD/DVD tray
and set the front tray to the paper position by pushing up the tray
lever.
If you need to adjust the print position or color, see your
on-screen User’s Guide or Printer Basics book.
Replacing an Ink Cartridge
When you print with low or expended ink cartridges, you see
a message on the LCD screen telling you which cartridges are
low or expended.
You’ll also see a message on your computer screen when you
print telling you which cartridge is low or expended.
When a cartridge is installed in the printer for more than six
months, you may need to replace it if printouts don’t look
their best. If the quality doesn’t improve after cleaning and
aligning the print head, you can replace the cartridge even if
the cartridge is not expended.
Checking the Ink Cartridge Status
Follow the steps below to check how much ink is left in your
cartridges.
Note: You can also check the ink cartridges using your computer;
see your Printer Basics manual or on-screen User’s Guide for
instructions.
1. Press Setup to enter the Setup menu.
2. Press l or r to select
Ink Cartridge Status, then press OK.
3. You see a screen showing the status of the ink cartridges:
The cartridges are identified as follows:
Y (yellow), B
(black),
LC (light cyan), LM (light magenta), M (magenta),
C (cyan).
4. When you’re done checking the ink cartridge status, press
OK. Press l or r to select OK, then press OK.
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once
you start replacing a cartridge, you must complete all the steps
in one session.
Caution: Leave the expended cartridge installed until you have
obtained a replacement, or the ink remaining in the print head
nozzles may dry out. To ensure good results, use genuine Epson
ink cartridges and do not refill them. Other products may cause
damage to your printer not covered by Epson’s warranty.
Make sure the CD/DVD
tray slides under the tab
(on both sides)
Make sure the
arrow marks
are aligned