Filter
Top Products
FENIX IMVICO
TK14 OPERATION MANUAL
45/65
APPENDIX A – SPECIFICATIONS
Printing method
Thermal line printing
Dot density
203 dpi x 203 dpi (dpi = dots per inch.
1 inch=25.4mm)
8 dots x mm
Printing direction
Unidirectional with friction feed
Printing width
48 mm (384 dots)
Character per line (default)
Font A: 42 Font B: 56
Character spacing (default)
0.5 mm (4 dots)
Character structure
Font A: 12 x 24 dots (1.5 x 3 mm).
Font B: 8 x 16 dots (1 x 2 mm).
Font A is the default.
Font A Font B
Character size (mm)
Standard: 1.5 x 3
Double-width: 3 x 3
Double-height: 1.5 x 6
Double width/height: 3 x 6
Standard: 1 x 2
Double-width: 2 x 2
Double-height: 1 x 4
Double width/height: 2 x 4
Character number
Alphanumeric characters: 95
Extended Graphics: 128 per page
Print speed
High speed mode: up to 62,5 mm/s
(The printing speed could vary automatically depending on
the print head temperature as well as the command
processing and the data transmission speed).
Paper feed speed
62,5 mm/s (continuous paper feed)
Line spacing (default)
0.99 mm
Paper roll
Width: 58 +0/-1mm
Maximum outside diameter: 80 mm (50 m approx.)
Minimum inner diameter: 25 mm
Minimum ticket length
Maximum ticket length suggested
120 mm
160 mm
Thermal paper type
At –5ºC to 50ºC
#
TF50KS-E2D
(59
µ
m paper )
TF77KS-E2
(95
µ
m paper)
TL69KS-HG76
(label paper)
At –30ºC to 70ºC
#
TL51KS-R2
(High heat-resistant
paper)
TL69KS-R2
(High heat-resistant
paper)
At 5ºC to 40ºC
#
TW80KK-S
(2-ply thermal paper)
From Nippon Paper
Industries
Interface (compatible)
RS-232C and IEEE 1284 (Nibble mode)
Receive buffer
10 Kbytes
Power supply
12V to 24V DC
±
10%
Peak current consumption
(64 dots activated)
3A (approx.)
Life span (at 25ºC )
Activation pulse resistance
Abrasion resistance
100 millions pulses or more (print ratio=12,5%).
50 Km or more.
Temperature
Operating: -30 to 70ºC
Storage: -35 to 75ºC, except for paper.
Overall dimensions (mm)
198,3 x 95 x 121,7 (H x W x D)
Weight (without paper)
1 Kg (approx.)