Filter
Top Products
Rev. C Using the Printer 3-11
TM-C100 Technical Reference Guide
3.5 FAQ
3.5.1 Printing on long paper (roll paper specification)
By turning on "Long print mode" in the driver settings, you can print long pages without
changing the paper size. See the driver manual for details.
Note:
When using OPOS-X, any cut position can be programmed. Note that there is no "Long print mode."
3.5.2 Cutting the paper at a fixed length (roll paper specification)
By turning off "Roll paper saving mode" and "Long print mode" in the driver settings, you can
cut the paper at a fixed size. See the driver manual for details.
Note:
When using OPOS-X, it is necessary to program the desired cut position. Note that there is no "Roll
paper saving mode" or "Long print mode."
3.5.3 Making fine color adjustments such as color matching
Unfortunately neither APD nor OPOS-X support these functions currently. Please adjust the
data for printing yourself.
3.6 Self Test
With the self test you can check if the printer is operating properly. It checks the control circuits,
printer mechanism, head nozzles status, and firmware version.
This test is independent of any other equipment or software, so it is a good idea to run it when
you first set up the printer and if you have any trouble. If the self tests work correctly, the
problem is in the other equipment or the software, not the printer.
3.6.1 Self Test Procedure
3.6.1.1 With the ASF specification
1. Check that the printer is turned off, the printer cover is closed, and the ASF is installed
properly.
2. Place paper in the ASF.
3. While pressing FEED, turn on the printer.