Filter
Top Products
When Vertical Corner is selected, adjust the left and right areas using the points nearest the center
of the image as your reference points.
Note: To reset your Corner Wall adjustments, press the Esc button for at least 2 seconds to display
a reset screen, then select Yes.
12. Use the arrow buttons on the projector or remote control to adjust the shape.
13. Repeat the previous two steps as necessary to adjust any remaining image parts.
If the image expands or contracts, continue with the next step to adjust the linearity.
14. Press the Esc button to return to the Corner Wall menu screen.
15. Select the Linearity setting and press Enter.
16. Adjust the linearity by doing the following:
• Press the left arrow button to shrink or contract the distance between the lines closest to the left or
top side of the image
• Press the right arrow button to shrink or contract the distance between the lines closest to the right
or bottom side of the image
108