Filter
Top Products
9. To move another point, press the Esc button and repeat the previous two steps.
10. When you are finished, press the Esc button twice and select Yes when you see the confirmation
message to return to the Black Level menu screen.
Note: Changing any of the Top Edge, Bottom Edge, Right Edge, or Left Edge settings will reset
the Black Level setting to its default value.
11. Select the Color Adjustment setting and press Enter.
You see this screen:
12. Adjust the brightness and tone of the areas that do not overlap to match the areas that overlap using
the displayed adjustment sliders.
13. When you are finished, press the Menu button to exit.
Parent topic: Using Multiple Projectors
Matching the Image Colors
You can match the display quality of multiple projectors that will project next to each other.
Note: Make sure you select Multi-Projection or 3D Multi-Projection (for 3D images) for the color
mode. Brightness and colors may not match exactly even after performing the steps below.
1. Press the Menu button.
147